Coolmar self contained air conditioners are manufactured of 304 class chrome cabinet and fixing elements, Cu-Ni condenser, blue hydrophilic epoxy paint coated Cu/Al evaporator. This way, they have long resistance excellently against seawater and long live as they are beside you all the time you need fresh atmosphere.

Units are reverse cycle as standard, having all cooling and heating components in a single chassis under compact design of Coolmar engineering. Chrome cabinet also ensures an excellent sound level, high protection for mechanical and electrical components that might have threats by outer effects.

Digitally controlled self contained units have 8 capacity ranges from 7500 up to 24.600 btu/h.  Higher ranges are available under custom production conditions. Sophisticated digital room control with touchpad buttons enables you to create an attractive atmosphere not only for yourselves, but also for your guests in any season of the year. Besides, you have wide selection of colour and design among various Vimar frames for your Coolmar control units.

Coolmar self contained units are very easy to install by 3 fixing elements on a convenient place. Fan body is able to rotate between  0° - 90° which enables an easy installation during the placement of air ducts.

Self contained box includes; Main unit (refrigerant charged), CM-MPC11 control unit, 4 m. control cable, air outlet adaptor, base fixing parts.

Optional accessories: CM-MPC30 control unit, suppy air grill, return air grill.

Split type air conditioners are composed of two parts. Condenser is the external unit with Coolmar chrome cabinet including compressor. Internal unit includes evaporator which provides the cooling process, and fan which transfers the cooled air in the room. These two units are connected to each other by isolated cupper pipe set. External unit is installed outside the room, for instance in the engine room. Internal unit is installed in the conditioned room. Having advantage of less space than self contained unit, and since the condensing part is out of the room, split units also have less sound level.

Units are reverse cycle as standard, having 8 capacity ranges from 7.500 up to 24.600 btu/h. Higher ranges are available under custom production conditions. Fan body can be adjusted between 0º- 180º which enables an easy installation during the placement of air ducts. Coolmar digital control provides you with a confident sailing among the waves by easy control of your own atmosphere in any season.

External unit of Coolmar splits are possible to feed two internal units that are installed in different rooms. For two conditioned rooms by subject multisplit system, various capacity combinations can be used on condition that the sum of internal unit cooling capacities, that have 7 ranges from 4.000 up to 20.000 btu/h are approximately equal to the external unit capacity connected.

Split box includes; Main unit (refrigerant charged), CM-MPC11 control unit, 4 m. control cable, air outlet adaptor, base fixing parts.

Optional accessories: CM-MPC30 control unit, suppy air grill, return air grill.

Coolmar chillers are manufactured as single modules, and for higher capacity ranges required capacity can be obtained by the connection of the modules to each other. Single module capacity ranges are from 24.000 Btu/h up to 72.000 Btu/h. By the installation of the modules  to each other by fixing elements, maximum range increases up to 288.000 Btu/h.

Modular system enables easy transportation, during the service, continuous operation for rest of the modules and easy reach to all parts. All Coolmar chillers are reverse cycle as standard, connected to Coolmar fan coil units for both heating or cooling of rooms. They are installed in engine room or another external convenient place, having 220 V  50 Hz  1 Ph   and  380 V  50 Hz  3 Ph options.

Coolmar chillers are equiped with Carel control units to create the desired atmosphere at any time. Excellent resistance to seawater by 304 chrome fittings and cabinet, having 90/10 Cu/Ni condenser, 316 quality plate heat exchanger. Also, units have long  life and high efficiency by refrigerant and water flow side protections.

Chiller box includes; Main unit (refrigerant charged), Carel control unit, base fixing parts.